1) Open Slide Design.
Open top slide virtually eliminates jamming or stovepiping.
Allows the user to load the chamber one cartridge at a time
should the magazine be lost or damaged.
2) No Glare Finish. Beretta’s exclusive Bruniton
non-reflective matte black finish is a superior corrosion
3) Automatic Firing Pin Block. The front part of the
firing pin is blocked from any forward movement until the
trigger is pulled completely back. Even if the pistols falls
and strikes the ground, muzzle-down, the firing pin will not
strike the primer.
4) Ambidextrous Manual Safety. Easily accessible by
the thumb of a right- or left-handed shooter, it is spring
loaded so it’s either positively “on” or positively “off.”
The safety lever on the slide also functions as the pistol’s
decocking lever. When pushed down, the rear part of the
firing pin (striker) is rotated out of alignment with the
front part of the firing pin. (Does not apply to D or G
5) Sure, Firm Grip. The front and back of the grip
are grooved, and the grip frame is flared slightly at the
base to enhance pointability and control.
6) Reversible Magazine Release Button. Positioned
next to the trigger guard for either right- or left-handed
shooters. Allows rapid reloading. Magazine drops clear when
7) Light Aluminum Frame with Combat-Style Trigger Guard.
The trigger guard is squared off and grooved for a firm grip
using one or two hands, even when wearing gloves.
8) Disassembly Latch. Conveniently located to
simplify field stripping and maintenance, the latch makes
the 92 FS one of the easiest guns to disassemble.
9) Unique Ultra-Safe Design. The safety levers on the
slide also function as the pistol’s decocking levers. When
pushed down, the rear part of the firing pin (striker) is
rotated out of alignment with the front part of the firing
Wide Range of Models.
There is a wide array of 96 pistols from which to select,
each with unique features.
The renowned sidearm of US Military is available in caliber
This model has a stainless steel slide, barrel, other key
components (safety levers, trigger, slide catch lever, etc.)
and internal parts. The alloy frame is anodized to match the
color and finish of the stainless slide and barrel. The 92
model feature rubber grips with a new stippled texture and
hex key grip screws.
Double action only version of the 96 pistol offering the
same safety system of the standard model. Every time the
trigger is pulled, the hammer (with spur removed) is cocked
This is double action-only version of the standard 96, with
no external safety levers (“slick slide”) and the hammer
spur removed. Extended side serrations provide a sure grip
for fast, easy racking of the slide. D models are as easy to
operate as a revolver, with the exact same smooth trigger
pull for each shot.
Derived from the famous 96, the new Vertec boasts numerous
features to satisfy the needs of law enforcement and special
The new vertical grip design, special short reach trigger
and thin dual textured grip panels guarantee a sure grip and
maximum control during rapid fire, even for small handed
shooters. An integral accessory rail is built into the frame
to attach a variety of flashlights or laser aiming systems.
The front sight is removable for the easy installation of
different sights or tritium sights meanwhile the magazine
well has been aggressively beveled for faster reloads.
Manufactured also in the Inox version.
96G Elite II.
The new Elite II pistols feature the recontoured slide of
the Brigadier model. The slide is stainless steel and boasts
removable front sight and Novak type rear sight. The
stainless steel barrel is slightly shorter 4.7” (119 mm) for
compactness. The pistol’s grip is grooved to enhance control
during firing, the beveled magazine well facilitates rapid
reloading, front and rear slide serrations provide a sure
grip for fast, easy racking of the slide, the skelotonized
hammer reduces lock time and the rubber magazine pad
protects the magazine if it is dropped.
Beretta Elite II models are available only in the G
configuration (when the lever is released after having been
activated to lower the hammer, it automatically returns to
the ready-to-fire position).
The Brigadier was designed to meet the special needs on the
INS* who wanted an accurate, reliable and durable .40
caliber pistol with removable front and rear sights. The
pistol incorporates all the high performance characteristics
of the traditional 92 Series pistols plus features that are
unique to the Brigadier.
The Brigadier’s slide is heavier and recontoured. Because of
the heavier slide, the gun’s balance is enhanced and felt
recoil is reduced, improving accuracy for follow-up shots.
The Brigadier is available, on request, with wrap around,
stippled rubber grips and hex key grip screws. The Brigadier
is also manufactured in a stainless steel version (96
Call for Pricing